[ Aug 27 19:48:16 Enabled. ]
[ Aug 27 19:48:16 Rereading configuration. ]
[ Aug 27 19:48:17 Rereading configuration. ]
[ Aug 27 19:48:18 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService10 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2024-08-27T19:48:18.472385825Z","hostname":"oxz_oximeter_2aadd0fc-5177-493a-9f7e-0593c0fe3187","pid":20813,"datalink":"oxControlService10"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2024-08-27T19:48:18.481043857Z","hostname":"oxz_oximeter_2aadd0fc-5177-493a-9f7e-0593c0fe3187","pid":20813,"datalink":"oxControlService10"}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2024-08-27T19:48:18.493930336Z","hostname":"oxz_oximeter_2aadd0fc-5177-493a-9f7e-0593c0fe3187","pid":20813,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService10\""}
{"msg":"Ensuring there is a default route","v":0,"name":"zone-setup","level":30,"time":"2024-08-27T19:48:18.95309059Z","hostname":"oxz_oximeter_2aadd0fc-5177-493a-9f7e-0593c0fe3187","pid":20813,"gateway":"Ipv6(fd00:1122:3344:101::1)"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2024-08-27T19:48:18.967524306Z","hostname":"oxz_oximeter_2aadd0fc-5177-493a-9f7e-0593c0fe3187","pid":20813,"zonename":"\"oxz_oximeter_2aadd0fc-5177-493a-9f7e-0593c0fe3187\""}
[ Aug 27 19:48:19 Method "start" exited with status 0. ]