[ Oct  4 16:11:13 Enabled. ]
[ Oct  4 16:11:13 Rereading configuration. ]
[ Oct  4 16:11:14 Rereading configuration. ]
[ Oct  4 16:11:14 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService18 -s fd00:1122:3344:101::14 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2024-10-04T16:11:14.997054269Z","hostname":"oxz_crucible_0f476fcd-a3b6-4396-b967-dfbc41c5ff52","pid":21057,"datalink":"oxControlService18"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2024-10-04T16:11:15.055490638Z","hostname":"oxz_crucible_0f476fcd-a3b6-4396-b967-dfbc41c5ff52","pid":21057,"datalink":"oxControlService18"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2024-10-04T16:11:15.081255456Z","hostname":"oxz_crucible_0f476fcd-a3b6-4396-b967-dfbc41c5ff52","pid":21057}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2024-10-04T16:11:15.092062665Z","hostname":"oxz_crucible_0f476fcd-a3b6-4396-b967-dfbc41c5ff52","pid":21057}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2024-10-04T16:11:15.126249935Z","hostname":"oxz_crucible_0f476fcd-a3b6-4396-b967-dfbc41c5ff52","pid":21057,"static address":"fd00:1122:3344:101::14","data link":"\"oxControlService18\""}
{"msg":"Ensuring there is a default route","v":0,"name":"zone-setup","level":30,"time":"2024-10-04T16:11:15.64811486Z","hostname":"oxz_crucible_0f476fcd-a3b6-4396-b967-dfbc41c5ff52","pid":21057,"gateway":"Ipv6(fd00:1122:3344:101::1)"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2024-10-04T16:11:15.686147194Z","hostname":"oxz_crucible_0f476fcd-a3b6-4396-b967-dfbc41c5ff52","pid":21057,"zonename":"\"oxz_crucible_0f476fcd-a3b6-4396-b967-dfbc41c5ff52\""}
[ Oct  4 16:11:15 Method "start" exited with status 0. ]