[ Oct  9 17:19:22 Enabled. ]
[ Oct  9 17:19:22 Rereading configuration. ]
[ Oct  9 17:19:23 Rereading configuration. ]
[ Oct  9 17:19:24 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService10 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2024-10-09T17:19:24.347552649Z","hostname":"oxz_oximeter_9dff3567-8578-462a-9da4-c47f6509483e","pid":19968,"datalink":"oxControlService10"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2024-10-09T17:19:24.357500413Z","hostname":"oxz_oximeter_9dff3567-8578-462a-9da4-c47f6509483e","pid":19968,"datalink":"oxControlService10"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2024-10-09T17:19:24.370360001Z","hostname":"oxz_oximeter_9dff3567-8578-462a-9da4-c47f6509483e","pid":19968}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2024-10-09T17:19:24.376277548Z","hostname":"oxz_oximeter_9dff3567-8578-462a-9da4-c47f6509483e","pid":19968}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2024-10-09T17:19:24.382998143Z","hostname":"oxz_oximeter_9dff3567-8578-462a-9da4-c47f6509483e","pid":19968,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService10\""}
{"msg":"Ensuring there is a default route","v":0,"name":"zone-setup","level":30,"time":"2024-10-09T17:19:24.842191491Z","hostname":"oxz_oximeter_9dff3567-8578-462a-9da4-c47f6509483e","pid":19968,"gateway":"Ipv6(fd00:1122:3344:101::1)"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2024-10-09T17:19:24.853758011Z","hostname":"oxz_oximeter_9dff3567-8578-462a-9da4-c47f6509483e","pid":19968,"zonename":"\"oxz_oximeter_9dff3567-8578-462a-9da4-c47f6509483e\""}
[ Oct  9 17:19:24 Method "start" exited with status 0. ]