[ Oct  9 22:14:54 Enabled. ]
[ Oct  9 22:14:54 Rereading configuration. ]
[ Oct  9 22:14:56 Rereading configuration. ]
[ Oct  9 22:14:58 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService16 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2024-10-09T22:14:58.871843751Z","hostname":"oxz_oximeter_831c2d57-e72a-48a5-a2e8-ff9934bf44bd","pid":20204,"datalink":"oxControlService16"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2024-10-09T22:14:58.878780387Z","hostname":"oxz_oximeter_831c2d57-e72a-48a5-a2e8-ff9934bf44bd","pid":20204,"datalink":"oxControlService16"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2024-10-09T22:14:58.896864844Z","hostname":"oxz_oximeter_831c2d57-e72a-48a5-a2e8-ff9934bf44bd","pid":20204}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2024-10-09T22:14:58.902092961Z","hostname":"oxz_oximeter_831c2d57-e72a-48a5-a2e8-ff9934bf44bd","pid":20204}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2024-10-09T22:14:58.907238307Z","hostname":"oxz_oximeter_831c2d57-e72a-48a5-a2e8-ff9934bf44bd","pid":20204,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService16\""}
{"msg":"Ensuring there is a default route","v":0,"name":"zone-setup","level":30,"time":"2024-10-09T22:14:59.366817513Z","hostname":"oxz_oximeter_831c2d57-e72a-48a5-a2e8-ff9934bf44bd","pid":20204,"gateway":"Ipv6(fd00:1122:3344:101::1)"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2024-10-09T22:14:59.383195632Z","hostname":"oxz_oximeter_831c2d57-e72a-48a5-a2e8-ff9934bf44bd","pid":20204,"zonename":"\"oxz_oximeter_831c2d57-e72a-48a5-a2e8-ff9934bf44bd\""}
[ Oct  9 22:14:59 Method "start" exited with status 0. ]