[ Oct 12 03:53:12 Enabled. ]
[ Oct 12 03:53:12 Rereading configuration. ]
[ Oct 12 03:53:13 Rereading configuration. ]
[ Oct 12 03:53:13 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService11 -s fd00:1122:3344:101::13 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2024-10-12T03:53:14.075140746Z","hostname":"oxz_crucible_0f61af14-0a97-45d6-b6ea-51ac5a92fd23","pid":21532,"datalink":"oxControlService11"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2024-10-12T03:53:14.08941414Z","hostname":"oxz_crucible_0f61af14-0a97-45d6-b6ea-51ac5a92fd23","pid":21532,"datalink":"oxControlService11"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2024-10-12T03:53:14.11754564Z","hostname":"oxz_crucible_0f61af14-0a97-45d6-b6ea-51ac5a92fd23","pid":21532}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2024-10-12T03:53:14.134774463Z","hostname":"oxz_crucible_0f61af14-0a97-45d6-b6ea-51ac5a92fd23","pid":21532}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2024-10-12T03:53:14.146038463Z","hostname":"oxz_crucible_0f61af14-0a97-45d6-b6ea-51ac5a92fd23","pid":21532,"static address":"fd00:1122:3344:101::13","data link":"\"oxControlService11\""}
{"msg":"Ensuring there is a default route","v":0,"name":"zone-setup","level":30,"time":"2024-10-12T03:53:14.615283508Z","hostname":"oxz_crucible_0f61af14-0a97-45d6-b6ea-51ac5a92fd23","pid":21532,"gateway":"Ipv6(fd00:1122:3344:101::1)"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2024-10-12T03:53:14.645156029Z","hostname":"oxz_crucible_0f61af14-0a97-45d6-b6ea-51ac5a92fd23","pid":21532,"zonename":"\"oxz_crucible_0f61af14-0a97-45d6-b6ea-51ac5a92fd23\""}
[ Oct 12 03:53:14 Method "start" exited with status 0. ]