[ Oct 16 19:54:26 Enabled. ]
[ Oct 16 19:54:26 Rereading configuration. ]
[ Oct 16 19:54:26 Rereading configuration. ]
[ Oct 16 19:54:27 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService5 -s fd00:1122:3344:101::3 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2024-10-16T19:54:27.304745377Z","hostname":"oxz_cockroachdb_08f1bccc-0c0f-4da9-a73c-85c577c189ba","pid":8685,"datalink":"oxControlService5"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2024-10-16T19:54:27.31165817Z","hostname":"oxz_cockroachdb_08f1bccc-0c0f-4da9-a73c-85c577c189ba","pid":8685,"datalink":"oxControlService5"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2024-10-16T19:54:27.327644082Z","hostname":"oxz_cockroachdb_08f1bccc-0c0f-4da9-a73c-85c577c189ba","pid":8685}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2024-10-16T19:54:27.33461428Z","hostname":"oxz_cockroachdb_08f1bccc-0c0f-4da9-a73c-85c577c189ba","pid":8685}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2024-10-16T19:54:27.35063743Z","hostname":"oxz_cockroachdb_08f1bccc-0c0f-4da9-a73c-85c577c189ba","pid":8685,"static address":"fd00:1122:3344:101::3","data link":"\"oxControlService5\""}
{"msg":"Ensuring there is a default route","v":0,"name":"zone-setup","level":30,"time":"2024-10-16T19:54:27.811133855Z","hostname":"oxz_cockroachdb_08f1bccc-0c0f-4da9-a73c-85c577c189ba","pid":8685,"gateway":"Ipv6(fd00:1122:3344:101::1)"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2024-10-16T19:54:27.823914682Z","hostname":"oxz_cockroachdb_08f1bccc-0c0f-4da9-a73c-85c577c189ba","pid":8685,"zonename":"\"oxz_cockroachdb_08f1bccc-0c0f-4da9-a73c-85c577c189ba\""}
[ Oct 16 19:54:27 Method "start" exited with status 0. ]