[ Oct 22 17:00:01 Enabled. ]
[ Oct 22 17:00:01 Rereading configuration. ]
[ Oct 22 17:00:02 Rereading configuration. ]
[ Oct 22 17:00:02 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService11 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2024-10-22T17:00:02.994819517Z","hostname":"oxz_oximeter_135e2296-32db-4ce3-bcc0-cc6f10b6e28f","pid":25078,"datalink":"oxControlService11"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2024-10-22T17:00:03.009966584Z","hostname":"oxz_oximeter_135e2296-32db-4ce3-bcc0-cc6f10b6e28f","pid":25078,"datalink":"oxControlService11"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2024-10-22T17:00:03.032538891Z","hostname":"oxz_oximeter_135e2296-32db-4ce3-bcc0-cc6f10b6e28f","pid":25078}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2024-10-22T17:00:03.040171156Z","hostname":"oxz_oximeter_135e2296-32db-4ce3-bcc0-cc6f10b6e28f","pid":25078}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2024-10-22T17:00:03.04905988Z","hostname":"oxz_oximeter_135e2296-32db-4ce3-bcc0-cc6f10b6e28f","pid":25078,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService11\""}
{"msg":"Ensuring there is a default route","v":0,"name":"zone-setup","level":30,"time":"2024-10-22T17:00:03.52252019Z","hostname":"oxz_oximeter_135e2296-32db-4ce3-bcc0-cc6f10b6e28f","pid":25078,"gateway":"Ipv6(fd00:1122:3344:101::1)"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2024-10-22T17:00:03.536633663Z","hostname":"oxz_oximeter_135e2296-32db-4ce3-bcc0-cc6f10b6e28f","pid":25078,"zonename":"\"oxz_oximeter_135e2296-32db-4ce3-bcc0-cc6f10b6e28f\""}
[ Oct 22 17:00:03 Method "start" exited with status 0. ]