[ Oct 31 20:20:48 Enabled. ]
[ Oct 31 20:20:48 Rereading configuration. ]
[ Oct 31 20:20:50 Rereading configuration. ]
[ Oct 31 20:20:51 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService21 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2024-10-31T20:20:51.244690966Z","hostname":"oxz_oximeter_6e71f19b-440f-4a40-bbbb-fa1de5a7e58c","pid":20980,"datalink":"oxControlService21"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2024-10-31T20:20:51.253194795Z","hostname":"oxz_oximeter_6e71f19b-440f-4a40-bbbb-fa1de5a7e58c","pid":20980,"datalink":"oxControlService21"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2024-10-31T20:20:51.266977077Z","hostname":"oxz_oximeter_6e71f19b-440f-4a40-bbbb-fa1de5a7e58c","pid":20980}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2024-10-31T20:20:51.274205874Z","hostname":"oxz_oximeter_6e71f19b-440f-4a40-bbbb-fa1de5a7e58c","pid":20980}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2024-10-31T20:20:51.280994233Z","hostname":"oxz_oximeter_6e71f19b-440f-4a40-bbbb-fa1de5a7e58c","pid":20980,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService21\""}
{"msg":"Ensuring there is a default route","v":0,"name":"zone-setup","level":30,"time":"2024-10-31T20:20:51.742408738Z","hostname":"oxz_oximeter_6e71f19b-440f-4a40-bbbb-fa1de5a7e58c","pid":20980,"gateway":"Ipv6(fd00:1122:3344:101::1)"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2024-10-31T20:20:51.773910671Z","hostname":"oxz_oximeter_6e71f19b-440f-4a40-bbbb-fa1de5a7e58c","pid":20980,"zonename":"\"oxz_oximeter_6e71f19b-440f-4a40-bbbb-fa1de5a7e58c\""}
[ Oct 31 20:20:51 Method "start" exited with status 0. ]