[ Nov  6 00:19:03 Enabled. ]
[ Nov  6 00:19:03 Rereading configuration. ]
[ Nov  6 00:19:04 Rereading configuration. ]
[ Nov  6 00:19:05 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService17 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2024-11-06T00:19:05.303066559Z","hostname":"oxz_oximeter_4e1b9b8b-9e08-4e6d-89c1-97aff5e8f01e","pid":23751,"datalink":"oxControlService17"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2024-11-06T00:19:05.311646044Z","hostname":"oxz_oximeter_4e1b9b8b-9e08-4e6d-89c1-97aff5e8f01e","pid":23751,"datalink":"oxControlService17"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2024-11-06T00:19:05.323494296Z","hostname":"oxz_oximeter_4e1b9b8b-9e08-4e6d-89c1-97aff5e8f01e","pid":23751}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2024-11-06T00:19:05.329155524Z","hostname":"oxz_oximeter_4e1b9b8b-9e08-4e6d-89c1-97aff5e8f01e","pid":23751}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2024-11-06T00:19:05.33542566Z","hostname":"oxz_oximeter_4e1b9b8b-9e08-4e6d-89c1-97aff5e8f01e","pid":23751,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService17\""}
{"msg":"Ensuring there is a default route","v":0,"name":"zone-setup","level":30,"time":"2024-11-06T00:19:05.798183108Z","hostname":"oxz_oximeter_4e1b9b8b-9e08-4e6d-89c1-97aff5e8f01e","pid":23751,"gateway":"Ipv6(fd00:1122:3344:101::1)"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2024-11-06T00:19:05.812911175Z","hostname":"oxz_oximeter_4e1b9b8b-9e08-4e6d-89c1-97aff5e8f01e","pid":23751,"zonename":"\"oxz_oximeter_4e1b9b8b-9e08-4e6d-89c1-97aff5e8f01e\""}
[ Nov  6 00:19:05 Method "start" exited with status 0. ]