[ Nov  6 23:59:21 Enabled. ]
[ Nov  6 23:59:21 Rereading configuration. ]
[ Nov  6 23:59:23 Rereading configuration. ]
[ Nov  6 23:59:23 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService14 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2024-11-06T23:59:23.866290185Z","hostname":"oxz_oximeter_7a13aa4d-214f-4c49-8977-3c4c2a2350e1","pid":20853,"datalink":"oxControlService14"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2024-11-06T23:59:23.878948276Z","hostname":"oxz_oximeter_7a13aa4d-214f-4c49-8977-3c4c2a2350e1","pid":20853,"datalink":"oxControlService14"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2024-11-06T23:59:23.895800098Z","hostname":"oxz_oximeter_7a13aa4d-214f-4c49-8977-3c4c2a2350e1","pid":20853}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2024-11-06T23:59:23.903169536Z","hostname":"oxz_oximeter_7a13aa4d-214f-4c49-8977-3c4c2a2350e1","pid":20853}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2024-11-06T23:59:23.911349261Z","hostname":"oxz_oximeter_7a13aa4d-214f-4c49-8977-3c4c2a2350e1","pid":20853,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService14\""}
{"msg":"Ensuring there is a default route","v":0,"name":"zone-setup","level":30,"time":"2024-11-06T23:59:24.374622751Z","hostname":"oxz_oximeter_7a13aa4d-214f-4c49-8977-3c4c2a2350e1","pid":20853,"gateway":"Ipv6(fd00:1122:3344:101::1)"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2024-11-06T23:59:24.389917949Z","hostname":"oxz_oximeter_7a13aa4d-214f-4c49-8977-3c4c2a2350e1","pid":20853,"zonename":"\"oxz_oximeter_7a13aa4d-214f-4c49-8977-3c4c2a2350e1\""}
[ Nov  6 23:59:24 Method "start" exited with status 0. ]