[ Nov  7 22:42:26 Enabled. ]
[ Nov  7 22:42:26 Rereading configuration. ]
[ Nov  7 22:42:29 Rereading configuration. ]
[ Nov  7 22:42:30 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService11 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2024-11-07T22:42:30.875837346Z","hostname":"oxz_oximeter_1d0ef856-8367-48e8-a7e7-21f345224101","pid":18528,"datalink":"oxControlService11"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2024-11-07T22:42:30.884026667Z","hostname":"oxz_oximeter_1d0ef856-8367-48e8-a7e7-21f345224101","pid":18528,"datalink":"oxControlService11"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2024-11-07T22:42:30.896277408Z","hostname":"oxz_oximeter_1d0ef856-8367-48e8-a7e7-21f345224101","pid":18528}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2024-11-07T22:42:30.901492068Z","hostname":"oxz_oximeter_1d0ef856-8367-48e8-a7e7-21f345224101","pid":18528}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2024-11-07T22:42:30.90674611Z","hostname":"oxz_oximeter_1d0ef856-8367-48e8-a7e7-21f345224101","pid":18528,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService11\""}
{"msg":"Ensuring there is a default route","v":0,"name":"zone-setup","level":30,"time":"2024-11-07T22:42:31.373182627Z","hostname":"oxz_oximeter_1d0ef856-8367-48e8-a7e7-21f345224101","pid":18528,"gateway":"Ipv6(fd00:1122:3344:101::1)"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2024-11-07T22:42:31.385814228Z","hostname":"oxz_oximeter_1d0ef856-8367-48e8-a7e7-21f345224101","pid":18528,"zonename":"\"oxz_oximeter_1d0ef856-8367-48e8-a7e7-21f345224101\""}
[ Nov  7 22:42:31 Method "start" exited with status 0. ]