[ Nov 15 21:42:07 Enabled. ]
[ Nov 15 21:42:07 Rereading configuration. ]
[ Nov 15 21:42:10 Rereading configuration. ]
[ Nov 15 21:42:13 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService23 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2024-11-15T21:42:13.339256276Z","hostname":"oxz_oximeter_5ef543c6-773f-4453-b7c6-1ba24a407ceb","pid":24601,"datalink":"oxControlService23"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2024-11-15T21:42:13.348992449Z","hostname":"oxz_oximeter_5ef543c6-773f-4453-b7c6-1ba24a407ceb","pid":24601,"datalink":"oxControlService23"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2024-11-15T21:42:13.362109665Z","hostname":"oxz_oximeter_5ef543c6-773f-4453-b7c6-1ba24a407ceb","pid":24601}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2024-11-15T21:42:13.368720628Z","hostname":"oxz_oximeter_5ef543c6-773f-4453-b7c6-1ba24a407ceb","pid":24601}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2024-11-15T21:42:13.374642596Z","hostname":"oxz_oximeter_5ef543c6-773f-4453-b7c6-1ba24a407ceb","pid":24601,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService23\""}
{"msg":"Ensuring there is a default route","v":0,"name":"zone-setup","level":30,"time":"2024-11-15T21:42:13.83293902Z","hostname":"oxz_oximeter_5ef543c6-773f-4453-b7c6-1ba24a407ceb","pid":24601,"gateway":"Ipv6(fd00:1122:3344:101::1)"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2024-11-15T21:42:13.84378721Z","hostname":"oxz_oximeter_5ef543c6-773f-4453-b7c6-1ba24a407ceb","pid":24601,"zonename":"\"oxz_oximeter_5ef543c6-773f-4453-b7c6-1ba24a407ceb\""}
[ Nov 15 21:42:13 Method "start" exited with status 0. ]