| 1 | | [ Nov 18 21:00:52 Enabled. ] |
| 2 | | [ Nov 18 21:00:52 Rereading configuration. ] |
| 3 | | [ Nov 18 21:00:54 Rereading configuration. ] |
| 4 | | [ Nov 18 21:00:58 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService26 -s fd00:1122:3344:101::c -g fd00:1122:3344:101::1"). ] |
| 5 | | note: configured to log to "/dev/stderr" |
| 6 | 2024-11-18T21:00:58.459Z | INFO | zone-setup: Ensuring IP interface exists on datalink
datalink = oxControlService26
|
| 7 | 2024-11-18T21:00:58.470Z | INFO | zone-setup: Setting MTU to 9000 for IPv6 and IPv4
datalink = oxControlService26
|
| 8 | 2024-11-18T21:00:58.487Z | INFO | zone-setup: Setting TCP recv_buf size to 1 MB
|
| 9 | 2024-11-18T21:00:58.496Z | INFO | zone-setup: Setting TCP congestion control algorithm to cubic
|
| 10 | 2024-11-18T21:00:58.503Z | INFO | zone-setup: Ensuring static and auto-configured addresses are set on the IP interface
data link = "oxControlService26"
static address = fd00:1122:3344:101::c
|
| 11 | 2024-11-18T21:00:58.965Z | INFO | zone-setup: Ensuring there is a default route
gateway = Ipv6(fd00:1122:3344:101::1)
|
| 12 | 2024-11-18T21:00:58.979Z | INFO | zone-setup: Populating hosts file for zone
zonename = "oxz_nexus_3dce42ed-74cb-4c8b-9326-8273a1efd563"
|
| 13 | | [ Nov 18 21:00:58 Method "start" exited with status 0. ] |