[ Nov 18 21:00:51 Enabled. ]
[ Nov 18 21:00:51 Rereading configuration. ]
[ Nov 18 21:00:54 Rereading configuration. ]
[ Nov 18 21:00:58 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService11 -s fd00:1122:3344:101::19 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2024-11-18T21:00:58.43885618Z","hostname":"oxz_crucible_6cdeb736-9e69-46f9-afb0-59255807dbe4","pid":27969,"datalink":"oxControlService11"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2024-11-18T21:00:58.451687826Z","hostname":"oxz_crucible_6cdeb736-9e69-46f9-afb0-59255807dbe4","pid":27969,"datalink":"oxControlService11"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2024-11-18T21:00:58.468036178Z","hostname":"oxz_crucible_6cdeb736-9e69-46f9-afb0-59255807dbe4","pid":27969}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2024-11-18T21:00:58.477239396Z","hostname":"oxz_crucible_6cdeb736-9e69-46f9-afb0-59255807dbe4","pid":27969}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2024-11-18T21:00:58.485904721Z","hostname":"oxz_crucible_6cdeb736-9e69-46f9-afb0-59255807dbe4","pid":27969,"static address":"fd00:1122:3344:101::19","data link":"\"oxControlService11\""}
{"msg":"Ensuring there is a default route","v":0,"name":"zone-setup","level":30,"time":"2024-11-18T21:00:58.949676749Z","hostname":"oxz_crucible_6cdeb736-9e69-46f9-afb0-59255807dbe4","pid":27969,"gateway":"Ipv6(fd00:1122:3344:101::1)"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2024-11-18T21:00:58.964445729Z","hostname":"oxz_crucible_6cdeb736-9e69-46f9-afb0-59255807dbe4","pid":27969,"zonename":"\"oxz_crucible_6cdeb736-9e69-46f9-afb0-59255807dbe4\""}
[ Nov 18 21:00:58 Method "start" exited with status 0. ]