[ Nov 21 19:33:05 Enabled. ]
[ Nov 21 19:33:05 Rereading configuration. ]
[ Nov 21 19:33:06 Rereading configuration. ]
[ Nov 21 19:33:09 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService21 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2024-11-21T19:33:09.844808949Z","hostname":"oxz_oximeter_5fb99117-c685-44d5-bec2-c58adb63b619","pid":23255,"datalink":"oxControlService21"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2024-11-21T19:33:09.860224965Z","hostname":"oxz_oximeter_5fb99117-c685-44d5-bec2-c58adb63b619","pid":23255,"datalink":"oxControlService21"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2024-11-21T19:33:09.878872064Z","hostname":"oxz_oximeter_5fb99117-c685-44d5-bec2-c58adb63b619","pid":23255}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2024-11-21T19:33:09.888114017Z","hostname":"oxz_oximeter_5fb99117-c685-44d5-bec2-c58adb63b619","pid":23255}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2024-11-21T19:33:09.89731277Z","hostname":"oxz_oximeter_5fb99117-c685-44d5-bec2-c58adb63b619","pid":23255,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService21\""}
{"msg":"Ensuring there is a default route","v":0,"name":"zone-setup","level":30,"time":"2024-11-21T19:33:10.359393535Z","hostname":"oxz_oximeter_5fb99117-c685-44d5-bec2-c58adb63b619","pid":23255,"gateway":"Ipv6(fd00:1122:3344:101::1)"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2024-11-21T19:33:10.373695535Z","hostname":"oxz_oximeter_5fb99117-c685-44d5-bec2-c58adb63b619","pid":23255,"zonename":"\"oxz_oximeter_5fb99117-c685-44d5-bec2-c58adb63b619\""}
[ Nov 21 19:33:10 Method "start" exited with status 0. ]