[ Nov 22 20:31:46 Enabled. ]
[ Nov 22 20:31:46 Rereading configuration. ]
[ Nov 22 20:31:47 Rereading configuration. ]
[ Nov 22 20:31:48 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService20 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2024-11-22T20:31:49.036279276Z","hostname":"oxz_oximeter_1c039189-a5ba-4d68-ace9-448d7d9a3f66","pid":24299,"datalink":"oxControlService20"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2024-11-22T20:31:49.049451978Z","hostname":"oxz_oximeter_1c039189-a5ba-4d68-ace9-448d7d9a3f66","pid":24299,"datalink":"oxControlService20"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2024-11-22T20:31:49.065683314Z","hostname":"oxz_oximeter_1c039189-a5ba-4d68-ace9-448d7d9a3f66","pid":24299}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2024-11-22T20:31:49.074081399Z","hostname":"oxz_oximeter_1c039189-a5ba-4d68-ace9-448d7d9a3f66","pid":24299}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2024-11-22T20:31:49.082011823Z","hostname":"oxz_oximeter_1c039189-a5ba-4d68-ace9-448d7d9a3f66","pid":24299,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService20\""}
{"msg":"Ensuring there is a default route","v":0,"name":"zone-setup","level":30,"time":"2024-11-22T20:31:49.545654174Z","hostname":"oxz_oximeter_1c039189-a5ba-4d68-ace9-448d7d9a3f66","pid":24299,"gateway":"Ipv6(fd00:1122:3344:101::1)"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2024-11-22T20:31:49.562617209Z","hostname":"oxz_oximeter_1c039189-a5ba-4d68-ace9-448d7d9a3f66","pid":24299,"zonename":"\"oxz_oximeter_1c039189-a5ba-4d68-ace9-448d7d9a3f66\""}
[ Nov 22 20:31:49 Method "start" exited with status 0. ]