[ Nov 22 20:31:49 Enabled. ]
[ Nov 22 20:31:49 Rereading configuration. ]
[ Nov 22 20:31:50 Rereading configuration. ]
[ Nov 22 20:31:53 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService13 -s fd00:1122:3344:101::12 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2024-11-22T20:31:53.185023729Z","hostname":"oxz_crucible_7bfceb24-d461-40ce-8d0a-00e78380ff73","pid":26636,"datalink":"oxControlService13"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2024-11-22T20:31:53.193596518Z","hostname":"oxz_crucible_7bfceb24-d461-40ce-8d0a-00e78380ff73","pid":26636,"datalink":"oxControlService13"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2024-11-22T20:31:53.210204544Z","hostname":"oxz_crucible_7bfceb24-d461-40ce-8d0a-00e78380ff73","pid":26636}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2024-11-22T20:31:53.219185823Z","hostname":"oxz_crucible_7bfceb24-d461-40ce-8d0a-00e78380ff73","pid":26636}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2024-11-22T20:31:53.2264138Z","hostname":"oxz_crucible_7bfceb24-d461-40ce-8d0a-00e78380ff73","pid":26636,"static address":"fd00:1122:3344:101::12","data link":"\"oxControlService13\""}
{"msg":"Ensuring there is a default route","v":0,"name":"zone-setup","level":30,"time":"2024-11-22T20:31:53.68757577Z","hostname":"oxz_crucible_7bfceb24-d461-40ce-8d0a-00e78380ff73","pid":26636,"gateway":"Ipv6(fd00:1122:3344:101::1)"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2024-11-22T20:31:53.701198782Z","hostname":"oxz_crucible_7bfceb24-d461-40ce-8d0a-00e78380ff73","pid":26636,"zonename":"\"oxz_crucible_7bfceb24-d461-40ce-8d0a-00e78380ff73\""}
[ Nov 22 20:31:53 Method "start" exited with status 0. ]