[ Nov 25 19:31:02 Enabled. ]
[ Nov 25 19:31:02 Rereading configuration. ]
[ Nov 25 19:31:04 Rereading configuration. ]
[ Nov 25 19:31:09 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService16 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2024-11-25T19:31:09.447101614Z","hostname":"oxz_oximeter_4f833d1f-8a98-4545-91ff-69d713fdd1f0","pid":28208,"datalink":"oxControlService16"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2024-11-25T19:31:09.458407355Z","hostname":"oxz_oximeter_4f833d1f-8a98-4545-91ff-69d713fdd1f0","pid":28208,"datalink":"oxControlService16"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2024-11-25T19:31:09.473531632Z","hostname":"oxz_oximeter_4f833d1f-8a98-4545-91ff-69d713fdd1f0","pid":28208}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2024-11-25T19:31:09.482537649Z","hostname":"oxz_oximeter_4f833d1f-8a98-4545-91ff-69d713fdd1f0","pid":28208}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2024-11-25T19:31:09.490001055Z","hostname":"oxz_oximeter_4f833d1f-8a98-4545-91ff-69d713fdd1f0","pid":28208,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService16\""}
{"msg":"Ensuring there is a default route","v":0,"name":"zone-setup","level":30,"time":"2024-11-25T19:31:09.950364458Z","hostname":"oxz_oximeter_4f833d1f-8a98-4545-91ff-69d713fdd1f0","pid":28208,"gateway":"Ipv6(fd00:1122:3344:101::1)"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2024-11-25T19:31:09.963914233Z","hostname":"oxz_oximeter_4f833d1f-8a98-4545-91ff-69d713fdd1f0","pid":28208,"zonename":"\"oxz_oximeter_4f833d1f-8a98-4545-91ff-69d713fdd1f0\""}
[ Nov 25 19:31:09 Method "start" exited with status 0. ]