[ Nov 26 23:31:55 Enabled. ]
[ Nov 26 23:31:55 Rereading configuration. ]
[ Nov 26 23:31:56 Rereading configuration. ]
[ Nov 26 23:31:59 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService13 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2024-11-26T23:31:59.373906209Z","hostname":"oxz_oximeter_4d4179df-b63f-4f83-9269-e472611505d2","pid":22548,"datalink":"oxControlService13"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2024-11-26T23:31:59.394198899Z","hostname":"oxz_oximeter_4d4179df-b63f-4f83-9269-e472611505d2","pid":22548,"datalink":"oxControlService13"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2024-11-26T23:31:59.418024771Z","hostname":"oxz_oximeter_4d4179df-b63f-4f83-9269-e472611505d2","pid":22548}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2024-11-26T23:31:59.430565988Z","hostname":"oxz_oximeter_4d4179df-b63f-4f83-9269-e472611505d2","pid":22548}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2024-11-26T23:31:59.441978625Z","hostname":"oxz_oximeter_4d4179df-b63f-4f83-9269-e472611505d2","pid":22548,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService13\""}
{"msg":"Ensuring there is a default route","v":0,"name":"zone-setup","level":30,"time":"2024-11-26T23:31:59.907714411Z","hostname":"oxz_oximeter_4d4179df-b63f-4f83-9269-e472611505d2","pid":22548,"gateway":"Ipv6(fd00:1122:3344:101::1)"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2024-11-26T23:31:59.92686558Z","hostname":"oxz_oximeter_4d4179df-b63f-4f83-9269-e472611505d2","pid":22548,"zonename":"\"oxz_oximeter_4d4179df-b63f-4f83-9269-e472611505d2\""}
[ Nov 26 23:31:59 Method "start" exited with status 0. ]