[ Dec 18 19:48:17 Enabled. ]
[ Dec 18 19:48:17 Rereading configuration. ]
[ Dec 18 19:48:19 Rereading configuration. ]
[ Dec 18 19:48:23 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService16 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2024-12-18T19:48:24.035459209Z","hostname":"oxz_oximeter_2a7637c0-f465-4032-a837-76ff2b185388","pid":26038,"datalink":"oxControlService16"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2024-12-18T19:48:24.049721832Z","hostname":"oxz_oximeter_2a7637c0-f465-4032-a837-76ff2b185388","pid":26038,"datalink":"oxControlService16"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2024-12-18T19:48:24.064959956Z","hostname":"oxz_oximeter_2a7637c0-f465-4032-a837-76ff2b185388","pid":26038}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2024-12-18T19:48:24.07294287Z","hostname":"oxz_oximeter_2a7637c0-f465-4032-a837-76ff2b185388","pid":26038}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2024-12-18T19:48:24.079576606Z","hostname":"oxz_oximeter_2a7637c0-f465-4032-a837-76ff2b185388","pid":26038,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService16\""}
{"msg":"Ensuring there is a default route","v":0,"name":"zone-setup","level":30,"time":"2024-12-18T19:48:24.543300384Z","hostname":"oxz_oximeter_2a7637c0-f465-4032-a837-76ff2b185388","pid":26038,"gateway":"Ipv6(fd00:1122:3344:101::1)"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2024-12-18T19:48:24.555474724Z","hostname":"oxz_oximeter_2a7637c0-f465-4032-a837-76ff2b185388","pid":26038,"zonename":"\"oxz_oximeter_2a7637c0-f465-4032-a837-76ff2b185388\""}
[ Dec 18 19:48:24 Method "start" exited with status 0. ]