[ Jan  9 01:55:17 Enabled. ]
[ Jan  9 01:55:17 Rereading configuration. ]
[ Jan  9 01:55:23 Rereading configuration. ]
[ Jan  9 01:55:26 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService21 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2025-01-09T01:55:26.906032314Z","hostname":"oxz_oximeter_2e61db93-7661-4d70-aa81-b31509361e0d","pid":21925,"datalink":"oxControlService21"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2025-01-09T01:55:26.918564855Z","hostname":"oxz_oximeter_2e61db93-7661-4d70-aa81-b31509361e0d","pid":21925,"datalink":"oxControlService21"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2025-01-09T01:55:26.936379267Z","hostname":"oxz_oximeter_2e61db93-7661-4d70-aa81-b31509361e0d","pid":21925}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2025-01-09T01:55:26.943352604Z","hostname":"oxz_oximeter_2e61db93-7661-4d70-aa81-b31509361e0d","pid":21925}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2025-01-09T01:55:26.950154017Z","hostname":"oxz_oximeter_2e61db93-7661-4d70-aa81-b31509361e0d","pid":21925,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService21\""}
{"msg":"Ensuring there is a default route","v":0,"name":"zone-setup","level":30,"time":"2025-01-09T01:55:27.411428615Z","hostname":"oxz_oximeter_2e61db93-7661-4d70-aa81-b31509361e0d","pid":21925,"gateway":"Ipv6(fd00:1122:3344:101::1)"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2025-01-09T01:55:27.426445964Z","hostname":"oxz_oximeter_2e61db93-7661-4d70-aa81-b31509361e0d","pid":21925,"zonename":"\"oxz_oximeter_2e61db93-7661-4d70-aa81-b31509361e0d\""}
[ Jan  9 01:55:27 Method "start" exited with status 0. ]