| 1 | | [ Jan 11 05:20:48 Enabled. ] |
| 2 | | [ Jan 11 05:20:48 Rereading configuration. ] |
| 3 | | [ Jan 11 05:20:49 Rereading configuration. ] |
| 4 | | [ Jan 11 05:20:53 Rereading configuration. ] |
| 5 | | [ Jan 11 05:20:57 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService0 -s fd00:1122:3344:101::2 -g fd00:1122:3344:101::1"). ] |
| 6 | | note: configured to log to "/dev/stderr" |
| 7 | 2025-01-11T05:20:57.662Z | INFO | zone-setup: Ensuring IP interface exists on datalink
datalink = oxControlService0
|
| 8 | 2025-01-11T05:20:59.656Z | INFO | zone-setup: Setting MTU to 9000 for IPv6 and IPv4
datalink = oxControlService0
|
| 9 | 2025-01-11T05:20:59.681Z | INFO | zone-setup: Setting TCP recv_buf size to 1 MB
|
| 10 | 2025-01-11T05:20:59.691Z | INFO | zone-setup: Setting TCP congestion control algorithm to cubic
|
| 11 | 2025-01-11T05:20:59.700Z | INFO | zone-setup: Ensuring static and auto-configured addresses are set on the IP interface
data link = "oxControlService0"
static address = fd00:1122:3344:101::2
|
| 12 | 2025-01-11T05:21:00.161Z | INFO | zone-setup: Ensuring there is a default route
gateway = Ipv6(fd00:1122:3344:101::1)
|
| 13 | 2025-01-11T05:21:00.172Z | INFO | zone-setup: Populating hosts file for zone
zonename = "oxz_switch"
|
| 14 | | [ Jan 11 05:21:00 Method "start" exited with status 0. ] |