| 1 | | [ Jan 15 00:39:46 Enabled. ] |
| 2 | | [ Jan 15 00:39:46 Rereading configuration. ] |
| 3 | | [ Jan 15 00:39:47 Rereading configuration. ] |
| 4 | | [ Jan 15 00:39:51 Rereading configuration. ] |
| 5 | | [ Jan 15 00:39:55 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService0 -s fd00:1122:3344:101::2 -g fd00:1122:3344:101::1"). ] |
| 6 | | note: configured to log to "/dev/stderr" |
| 7 | 2025-01-15T00:39:55.854Z | INFO | zone-setup: Ensuring IP interface exists on datalink
datalink = oxControlService0
|
| 8 | 2025-01-15T00:39:57.832Z | INFO | zone-setup: Setting MTU to 9000 for IPv6 and IPv4
datalink = oxControlService0
|
| 9 | 2025-01-15T00:39:57.844Z | INFO | zone-setup: Setting TCP recv_buf size to 1 MB
|
| 10 | 2025-01-15T00:39:57.850Z | INFO | zone-setup: Setting TCP congestion control algorithm to cubic
|
| 11 | 2025-01-15T00:39:57.855Z | INFO | zone-setup: Ensuring static and auto-configured addresses are set on the IP interface
data link = "oxControlService0"
static address = fd00:1122:3344:101::2
|
| 12 | 2025-01-15T00:39:58.312Z | INFO | zone-setup: Ensuring there is a default route
gateway = Ipv6(fd00:1122:3344:101::1)
|
| 13 | 2025-01-15T00:39:58.323Z | INFO | zone-setup: Populating hosts file for zone
zonename = "oxz_switch"
|
| 14 | | [ Jan 15 00:39:58 Method "start" exited with status 0. ] |