[ Jan 16 19:48:44 Enabled. ]
[ Jan 16 19:48:44 Rereading configuration. ]
[ Jan 16 19:48:45 Rereading configuration. ]
[ Jan 16 19:48:47 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService12 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2025-01-16T19:48:48.012401117Z","hostname":"oxz_oximeter_d048ac10-211f-4354-a749-75b8d62cfaed","pid":21414,"datalink":"oxControlService12"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2025-01-16T19:48:48.020759124Z","hostname":"oxz_oximeter_d048ac10-211f-4354-a749-75b8d62cfaed","pid":21414,"datalink":"oxControlService12"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2025-01-16T19:48:48.031735426Z","hostname":"oxz_oximeter_d048ac10-211f-4354-a749-75b8d62cfaed","pid":21414}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2025-01-16T19:48:48.038454734Z","hostname":"oxz_oximeter_d048ac10-211f-4354-a749-75b8d62cfaed","pid":21414}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2025-01-16T19:48:48.044222606Z","hostname":"oxz_oximeter_d048ac10-211f-4354-a749-75b8d62cfaed","pid":21414,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService12\""}
{"msg":"Ensuring there is a default route","v":0,"name":"zone-setup","level":30,"time":"2025-01-16T19:48:48.503777749Z","hostname":"oxz_oximeter_d048ac10-211f-4354-a749-75b8d62cfaed","pid":21414,"gateway":"Ipv6(fd00:1122:3344:101::1)"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2025-01-16T19:48:48.516098386Z","hostname":"oxz_oximeter_d048ac10-211f-4354-a749-75b8d62cfaed","pid":21414,"zonename":"\"oxz_oximeter_d048ac10-211f-4354-a749-75b8d62cfaed\""}
[ Jan 16 19:48:48 Method "start" exited with status 0. ]