[ Feb 21 09:58:10 Enabled. ]
[ Feb 21 09:58:10 Rereading configuration. ]
[ Feb 21 09:58:11 Rereading configuration. ]
[ Feb 21 09:58:13 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService19 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2025-02-21T09:58:13.337125289Z","hostname":"oxz_oximeter_8d248760-b8d2-4503-94cf-92f282d79332","pid":22051,"datalink":"oxControlService19"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2025-02-21T09:58:13.356029156Z","hostname":"oxz_oximeter_8d248760-b8d2-4503-94cf-92f282d79332","pid":22051,"datalink":"oxControlService19"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2025-02-21T09:58:13.376300685Z","hostname":"oxz_oximeter_8d248760-b8d2-4503-94cf-92f282d79332","pid":22051}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2025-02-21T09:58:13.386205484Z","hostname":"oxz_oximeter_8d248760-b8d2-4503-94cf-92f282d79332","pid":22051}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2025-02-21T09:58:13.398310117Z","hostname":"oxz_oximeter_8d248760-b8d2-4503-94cf-92f282d79332","pid":22051,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService19\""}
{"msg":"Ensuring there is a default route","v":0,"name":"zone-setup","level":30,"time":"2025-02-21T09:58:13.864373437Z","hostname":"oxz_oximeter_8d248760-b8d2-4503-94cf-92f282d79332","pid":22051,"gateway":"Ipv6(fd00:1122:3344:101::1)"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2025-02-21T09:58:13.88312453Z","hostname":"oxz_oximeter_8d248760-b8d2-4503-94cf-92f282d79332","pid":22051,"zonename":"\"oxz_oximeter_8d248760-b8d2-4503-94cf-92f282d79332\""}
[ Feb 21 09:58:13 Method "start" exited with status 0. ]