[ Feb 24 21:43:43 Enabled. ] [ Feb 24 21:43:43 Rereading configuration. ] [ Feb 24 21:43:46 Rereading configuration. ] [ Feb 24 21:43:50 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService10 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ] note: configured to log to "/dev/stderr" {"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2025-02-24T21:43:50.921593928Z","hostname":"oxz_oximeter_9c2f667f-c53e-4200-b28a-93719d8d5f02","pid":21898,"datalink":"oxControlService10"} {"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2025-02-24T21:43:50.934321116Z","hostname":"oxz_oximeter_9c2f667f-c53e-4200-b28a-93719d8d5f02","pid":21898,"datalink":"oxControlService10"} {"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2025-02-24T21:43:50.949805304Z","hostname":"oxz_oximeter_9c2f667f-c53e-4200-b28a-93719d8d5f02","pid":21898} {"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2025-02-24T21:43:50.959561339Z","hostname":"oxz_oximeter_9c2f667f-c53e-4200-b28a-93719d8d5f02","pid":21898} {"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2025-02-24T21:43:50.969269662Z","hostname":"oxz_oximeter_9c2f667f-c53e-4200-b28a-93719d8d5f02","pid":21898,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService10\""} {"msg":"Ensuring there is a default route","v":0,"name":"zone-setup","level":30,"time":"2025-02-24T21:43:51.439821008Z","hostname":"oxz_oximeter_9c2f667f-c53e-4200-b28a-93719d8d5f02","pid":21898,"gateway":"Ipv6(fd00:1122:3344:101::1)"} {"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2025-02-24T21:43:51.45505539Z","hostname":"oxz_oximeter_9c2f667f-c53e-4200-b28a-93719d8d5f02","pid":21898,"zonename":"\"oxz_oximeter_9c2f667f-c53e-4200-b28a-93719d8d5f02\""} [ Feb 24 21:43:51 Method "start" exited with status 0. ]