| 1 | | [ Feb 28 02:09:35 Enabled. ] |
| 2 | | [ Feb 28 02:09:35 Rereading configuration. ] |
| 3 | | [ Feb 28 02:09:38 Rereading configuration. ] |
| 4 | | [ Feb 28 02:09:50 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService19 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ] |
| 5 | | note: configured to log to "/dev/stderr" |
| 6 | 2025-02-28T02:09:51.023Z | INFO | zone-setup: Ensuring IP interface exists on datalink
datalink = oxControlService19
|
| 7 | 2025-02-28T02:09:51.038Z | INFO | zone-setup: Setting MTU to 9000 for IPv6 and IPv4
datalink = oxControlService19
|
| 8 | 2025-02-28T02:09:51.054Z | INFO | zone-setup: Setting TCP recv_buf size to 1 MB
|
| 9 | 2025-02-28T02:09:51.061Z | INFO | zone-setup: Setting TCP congestion control algorithm to cubic
|
| 10 | 2025-02-28T02:09:51.067Z | INFO | zone-setup: Ensuring static and auto-configured addresses are set on the IP interface
data link = "oxControlService19"
static address = fd00:1122:3344:101::d
|
| 11 | 2025-02-28T02:09:51.526Z | INFO | zone-setup: Ensuring there is a default route
gateway = Ipv6(fd00:1122:3344:101::1)
|
| 12 | 2025-02-28T02:09:51.537Z | INFO | zone-setup: Populating hosts file for zone
zonename = "oxz_oximeter_5b2025ef-6347-4939-a58e-a3b260c96fcc"
|
| 13 | | [ Feb 28 02:09:51 Method "start" exited with status 0. ] |