| 1 | | [ Feb 28 23:07:26 Enabled. ] |
| 2 | | [ Feb 28 23:07:26 Rereading configuration. ] |
| 3 | | [ Feb 28 23:07:26 Rereading configuration. ] |
| 4 | | [ Feb 28 23:07:27 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService2 -s fd00:1122:3344:3::1 -g fd00:1122:3344:3::2"). ] |
| 5 | | note: configured to log to "/dev/stderr" |
| 6 | 2025-02-28T23:07:27.441Z | INFO | zone-setup: Ensuring IP interface exists on datalink
datalink = oxControlService2
|
| 7 | 2025-02-28T23:07:27.450Z | INFO | zone-setup: Setting MTU to 9000 for IPv6 and IPv4
datalink = oxControlService2
|
| 8 | 2025-02-28T23:07:27.462Z | INFO | zone-setup: Setting TCP recv_buf size to 1 MB
|
| 9 | 2025-02-28T23:07:27.468Z | INFO | zone-setup: Setting TCP congestion control algorithm to cubic
|
| 10 | 2025-02-28T23:07:27.473Z | INFO | zone-setup: Ensuring static and auto-configured addresses are set on the IP interface
data link = "oxControlService2"
static address = fd00:1122:3344:3::1
|
| 11 | 2025-02-28T23:07:27.931Z | INFO | zone-setup: Ensuring there is a default route
gateway = Ipv6(fd00:1122:3344:3::2)
|
| 12 | 2025-02-28T23:07:27.941Z | INFO | zone-setup: Populating hosts file for zone
zonename = "oxz_internal_dns_b1a15522-b7b4-4549-b93c-db325c92868f"
|
| 13 | | [ Feb 28 23:07:27 Method "start" exited with status 0. ] |