[ Mar  1 01:14:43 Enabled. ]
[ Mar  1 01:14:43 Rereading configuration. ]
[ Mar  1 01:14:44 Rereading configuration. ]
[ Mar  1 01:14:46 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService16 -s fd00:1122:3344:101::14 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2025-03-01T01:14:47.060432937Z","hostname":"oxz_crucible_26e51894-548a-446f-bcf0-d900f3fcd639","pid":22771,"datalink":"oxControlService16"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2025-03-01T01:14:47.071575394Z","hostname":"oxz_crucible_26e51894-548a-446f-bcf0-d900f3fcd639","pid":22771,"datalink":"oxControlService16"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2025-03-01T01:14:47.086969177Z","hostname":"oxz_crucible_26e51894-548a-446f-bcf0-d900f3fcd639","pid":22771}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2025-03-01T01:14:47.094133903Z","hostname":"oxz_crucible_26e51894-548a-446f-bcf0-d900f3fcd639","pid":22771}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2025-03-01T01:14:47.10085944Z","hostname":"oxz_crucible_26e51894-548a-446f-bcf0-d900f3fcd639","pid":22771,"static address":"fd00:1122:3344:101::14","data link":"\"oxControlService16\""}
{"msg":"Ensuring there is a default route","v":0,"name":"zone-setup","level":30,"time":"2025-03-01T01:14:47.561410531Z","hostname":"oxz_crucible_26e51894-548a-446f-bcf0-d900f3fcd639","pid":22771,"gateway":"Ipv6(fd00:1122:3344:101::1)"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2025-03-01T01:14:47.575001818Z","hostname":"oxz_crucible_26e51894-548a-446f-bcf0-d900f3fcd639","pid":22771,"zonename":"\"oxz_crucible_26e51894-548a-446f-bcf0-d900f3fcd639\""}
[ Mar  1 01:14:47 Method "start" exited with status 0. ]