[ Mar  7 22:33:42 Enabled. ]
[ Mar  7 22:33:42 Rereading configuration. ]
[ Mar  7 22:33:43 Rereading configuration. ]
[ Mar  7 22:33:46 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService16 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2025-03-07T22:33:46.139113133Z","hostname":"oxz_oximeter_7b5e9a24-6b39-4a58-a275-8cc5a75195d8","pid":22047,"datalink":"oxControlService16"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2025-03-07T22:33:46.151318Z","hostname":"oxz_oximeter_7b5e9a24-6b39-4a58-a275-8cc5a75195d8","pid":22047,"datalink":"oxControlService16"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2025-03-07T22:33:46.17211565Z","hostname":"oxz_oximeter_7b5e9a24-6b39-4a58-a275-8cc5a75195d8","pid":22047}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2025-03-07T22:33:46.181565761Z","hostname":"oxz_oximeter_7b5e9a24-6b39-4a58-a275-8cc5a75195d8","pid":22047}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2025-03-07T22:33:46.189973002Z","hostname":"oxz_oximeter_7b5e9a24-6b39-4a58-a275-8cc5a75195d8","pid":22047,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService16\""}
{"msg":"Ensuring there is a default route","v":0,"name":"zone-setup","level":30,"time":"2025-03-07T22:33:46.653629287Z","hostname":"oxz_oximeter_7b5e9a24-6b39-4a58-a275-8cc5a75195d8","pid":22047,"gateway":"Ipv6(fd00:1122:3344:101::1)"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2025-03-07T22:33:46.667853974Z","hostname":"oxz_oximeter_7b5e9a24-6b39-4a58-a275-8cc5a75195d8","pid":22047,"zonename":"\"oxz_oximeter_7b5e9a24-6b39-4a58-a275-8cc5a75195d8\""}
[ Mar  7 22:33:46 Method "start" exited with status 0. ]