[ Mar 18 03:45:30 Enabled. ]
[ Mar 18 03:45:30 Rereading configuration. ]
[ Mar 18 03:45:32 Rereading configuration. ]
[ Mar 18 03:45:36 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService17 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2025-03-18T03:45:36.449587494Z","hostname":"oxz_oximeter_8f915d9e-1b3d-4183-b23d-38e2878d8918","pid":26371,"datalink":"oxControlService17"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2025-03-18T03:45:36.480775923Z","hostname":"oxz_oximeter_8f915d9e-1b3d-4183-b23d-38e2878d8918","pid":26371,"datalink":"oxControlService17"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2025-03-18T03:45:36.503167729Z","hostname":"oxz_oximeter_8f915d9e-1b3d-4183-b23d-38e2878d8918","pid":26371}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2025-03-18T03:45:36.510750173Z","hostname":"oxz_oximeter_8f915d9e-1b3d-4183-b23d-38e2878d8918","pid":26371}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2025-03-18T03:45:36.520900425Z","hostname":"oxz_oximeter_8f915d9e-1b3d-4183-b23d-38e2878d8918","pid":26371,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService17\""}
{"msg":"Ensuring there is a default route","v":0,"name":"zone-setup","level":30,"time":"2025-03-18T03:45:36.984970806Z","hostname":"oxz_oximeter_8f915d9e-1b3d-4183-b23d-38e2878d8918","pid":26371,"gateway":"Ipv6(fd00:1122:3344:101::1)"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2025-03-18T03:45:37.002949896Z","hostname":"oxz_oximeter_8f915d9e-1b3d-4183-b23d-38e2878d8918","pid":26371,"zonename":"\"oxz_oximeter_8f915d9e-1b3d-4183-b23d-38e2878d8918\""}
[ Mar 18 03:45:37 Method "start" exited with status 0. ]