[ Apr 16 03:53:55 Enabled. ]
[ Apr 16 03:53:55 Rereading configuration. ]
[ Apr 16 03:53:58 Rereading configuration. ]
[ Apr 16 03:54:05 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService13 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2025-04-16T03:54:05.737561587Z","hostname":"oxz_oximeter_0efaecbf-c4c4-456a-96b6-2cd10690be0f","pid":24305,"datalink":"oxControlService13"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2025-04-16T03:54:05.746783649Z","hostname":"oxz_oximeter_0efaecbf-c4c4-456a-96b6-2cd10690be0f","pid":24305,"datalink":"oxControlService13"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2025-04-16T03:54:05.759146913Z","hostname":"oxz_oximeter_0efaecbf-c4c4-456a-96b6-2cd10690be0f","pid":24305}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2025-04-16T03:54:05.765148331Z","hostname":"oxz_oximeter_0efaecbf-c4c4-456a-96b6-2cd10690be0f","pid":24305}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2025-04-16T03:54:05.770637839Z","hostname":"oxz_oximeter_0efaecbf-c4c4-456a-96b6-2cd10690be0f","pid":24305,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService13\""}
{"msg":"Ensuring there is a default route","v":0,"name":"zone-setup","level":30,"time":"2025-04-16T03:54:06.229936685Z","hostname":"oxz_oximeter_0efaecbf-c4c4-456a-96b6-2cd10690be0f","pid":24305,"gateway":"Ipv6(fd00:1122:3344:101::1)"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2025-04-16T03:54:06.255954669Z","hostname":"oxz_oximeter_0efaecbf-c4c4-456a-96b6-2cd10690be0f","pid":24305,"zonename":"\"oxz_oximeter_0efaecbf-c4c4-456a-96b6-2cd10690be0f\""}
[ Apr 16 03:54:06 Method "start" exited with status 0. ]