[ Apr 16 03:53:52 Enabled. ]
[ Apr 16 03:53:52 Rereading configuration. ]
[ Apr 16 03:53:56 Rereading configuration. ]
[ Apr 16 03:54:05 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService12 -s fd00:1122:3344:101::17 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2025-04-16T03:54:05.510209559Z","hostname":"oxz_crucible_73c28a42-0c68-459a-804f-cb8a7f284f59","pid":24011,"datalink":"oxControlService12"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2025-04-16T03:54:05.521671175Z","hostname":"oxz_crucible_73c28a42-0c68-459a-804f-cb8a7f284f59","pid":24011,"datalink":"oxControlService12"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2025-04-16T03:54:05.540922135Z","hostname":"oxz_crucible_73c28a42-0c68-459a-804f-cb8a7f284f59","pid":24011}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2025-04-16T03:54:05.54979685Z","hostname":"oxz_crucible_73c28a42-0c68-459a-804f-cb8a7f284f59","pid":24011}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2025-04-16T03:54:05.561534842Z","hostname":"oxz_crucible_73c28a42-0c68-459a-804f-cb8a7f284f59","pid":24011,"static address":"fd00:1122:3344:101::17","data link":"\"oxControlService12\""}
{"msg":"Ensuring there is a default route","v":0,"name":"zone-setup","level":30,"time":"2025-04-16T03:54:06.034566519Z","hostname":"oxz_crucible_73c28a42-0c68-459a-804f-cb8a7f284f59","pid":24011,"gateway":"Ipv6(fd00:1122:3344:101::1)"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2025-04-16T03:54:06.046123817Z","hostname":"oxz_crucible_73c28a42-0c68-459a-804f-cb8a7f284f59","pid":24011,"zonename":"\"oxz_crucible_73c28a42-0c68-459a-804f-cb8a7f284f59\""}
[ Apr 16 03:54:06 Method "start" exited with status 0. ]