[ May 13 23:01:15 Enabled. ]
[ May 13 23:01:15 Rereading configuration. ]
[ May 13 23:01:18 Rereading configuration. ]
[ May 13 23:01:26 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService22 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2025-05-13T23:01:26.815410045Z","hostname":"oxz_oximeter_a5f19881-7868-4033-8afe-ccedf373de85","pid":25437,"datalink":"oxControlService22"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2025-05-13T23:01:26.839698343Z","hostname":"oxz_oximeter_a5f19881-7868-4033-8afe-ccedf373de85","pid":25437,"datalink":"oxControlService22"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2025-05-13T23:01:26.854477516Z","hostname":"oxz_oximeter_a5f19881-7868-4033-8afe-ccedf373de85","pid":25437}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2025-05-13T23:01:26.862599075Z","hostname":"oxz_oximeter_a5f19881-7868-4033-8afe-ccedf373de85","pid":25437}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2025-05-13T23:01:26.870809988Z","hostname":"oxz_oximeter_a5f19881-7868-4033-8afe-ccedf373de85","pid":25437,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService22\""}
{"msg":"Ensuring there is a default route","v":0,"name":"zone-setup","level":30,"time":"2025-05-13T23:01:27.330955302Z","hostname":"oxz_oximeter_a5f19881-7868-4033-8afe-ccedf373de85","pid":25437,"gateway":"Ipv6(fd00:1122:3344:101::1)"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2025-05-13T23:01:27.345199818Z","hostname":"oxz_oximeter_a5f19881-7868-4033-8afe-ccedf373de85","pid":25437,"zonename":"\"oxz_oximeter_a5f19881-7868-4033-8afe-ccedf373de85\""}
[ May 13 23:01:27 Method "start" exited with status 0. ]