[ May 22 21:17:23 Enabled. ]
[ May 22 21:17:23 Rereading configuration. ]
[ May 22 21:17:24 Rereading configuration. ]
[ May 22 21:17:27 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService18 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2025-05-22T21:17:27.279104538Z","hostname":"oxz_oximeter_5d686ed8-2833-474e-a52b-856ddeb711e7","pid":25903,"datalink":"oxControlService18"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2025-05-22T21:17:27.288313585Z","hostname":"oxz_oximeter_5d686ed8-2833-474e-a52b-856ddeb711e7","pid":25903,"datalink":"oxControlService18"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2025-05-22T21:17:27.303575842Z","hostname":"oxz_oximeter_5d686ed8-2833-474e-a52b-856ddeb711e7","pid":25903}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2025-05-22T21:17:27.31349437Z","hostname":"oxz_oximeter_5d686ed8-2833-474e-a52b-856ddeb711e7","pid":25903}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2025-05-22T21:17:27.318669127Z","hostname":"oxz_oximeter_5d686ed8-2833-474e-a52b-856ddeb711e7","pid":25903,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService18\""}
{"msg":"Ensuring there is a default route","v":0,"name":"zone-setup","level":30,"time":"2025-05-22T21:17:27.784275546Z","hostname":"oxz_oximeter_5d686ed8-2833-474e-a52b-856ddeb711e7","pid":25903,"gateway":"Ipv6(fd00:1122:3344:101::1)"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2025-05-22T21:17:27.795034326Z","hostname":"oxz_oximeter_5d686ed8-2833-474e-a52b-856ddeb711e7","pid":25903,"zonename":"\"oxz_oximeter_5d686ed8-2833-474e-a52b-856ddeb711e7\""}
[ May 22 21:17:27 Method "start" exited with status 0. ]