[ Jul 17 23:51:32 Enabled. ]
[ Jul 17 23:51:32 Rereading configuration. ]
[ Jul 17 23:51:33 Rereading configuration. ]
[ Jul 17 23:51:38 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService12 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2025-07-17T23:51:38.494655281Z","hostname":"oxz_oximeter_13431648-c0eb-4fbe-bcca-ada1fdea1060","pid":23923,"datalink":"oxControlService12"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2025-07-17T23:51:38.499944482Z","hostname":"oxz_oximeter_13431648-c0eb-4fbe-bcca-ada1fdea1060","pid":23923,"datalink":"oxControlService12"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2025-07-17T23:51:38.507954906Z","hostname":"oxz_oximeter_13431648-c0eb-4fbe-bcca-ada1fdea1060","pid":23923}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2025-07-17T23:51:38.51214689Z","hostname":"oxz_oximeter_13431648-c0eb-4fbe-bcca-ada1fdea1060","pid":23923}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2025-07-17T23:51:38.515939519Z","hostname":"oxz_oximeter_13431648-c0eb-4fbe-bcca-ada1fdea1060","pid":23923,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService12\""}
{"msg":"Ensuring there is a default route","v":0,"name":"zone-setup","level":30,"time":"2025-07-17T23:51:38.973225759Z","hostname":"oxz_oximeter_13431648-c0eb-4fbe-bcca-ada1fdea1060","pid":23923,"gateway":"Ipv6(fd00:1122:3344:101::1)"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2025-07-17T23:51:38.990143669Z","hostname":"oxz_oximeter_13431648-c0eb-4fbe-bcca-ada1fdea1060","pid":23923,"zonename":"\"oxz_oximeter_13431648-c0eb-4fbe-bcca-ada1fdea1060\""}
[ Jul 17 23:51:38 Method "start" exited with status 0. ]