[ Jul 19 07:28:13 Enabled. ]
[ Jul 19 07:28:13 Rereading configuration. ]
[ Jul 19 07:28:14 Rereading configuration. ]
[ Jul 19 07:28:17 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService22 -s fd00:1122:3344:101::19 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2025-07-19T07:28:17.622109637Z","hostname":"oxz_crucible_d46ca715-2efd-4731-aaff-b2796481b357","pid":21908,"datalink":"oxControlService22"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2025-07-19T07:28:17.631022248Z","hostname":"oxz_crucible_d46ca715-2efd-4731-aaff-b2796481b357","pid":21908,"datalink":"oxControlService22"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2025-07-19T07:28:17.640537851Z","hostname":"oxz_crucible_d46ca715-2efd-4731-aaff-b2796481b357","pid":21908}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2025-07-19T07:28:17.644575022Z","hostname":"oxz_crucible_d46ca715-2efd-4731-aaff-b2796481b357","pid":21908}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2025-07-19T07:28:17.649517453Z","hostname":"oxz_crucible_d46ca715-2efd-4731-aaff-b2796481b357","pid":21908,"static address":"fd00:1122:3344:101::19","data link":"\"oxControlService22\""}
{"msg":"Ensuring there is a default route","v":0,"name":"zone-setup","level":30,"time":"2025-07-19T07:28:18.11552344Z","hostname":"oxz_crucible_d46ca715-2efd-4731-aaff-b2796481b357","pid":21908,"gateway":"Ipv6(fd00:1122:3344:101::1)"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2025-07-19T07:28:18.12488044Z","hostname":"oxz_crucible_d46ca715-2efd-4731-aaff-b2796481b357","pid":21908,"zonename":"\"oxz_crucible_d46ca715-2efd-4731-aaff-b2796481b357\""}
[ Jul 19 07:28:18 Method "start" exited with status 0. ]