[ Aug  1 21:19:43 Enabled. ]
[ Aug  1 21:19:43 Rereading configuration. ]
[ Aug  1 21:19:44 Rereading configuration. ]
[ Aug  1 21:19:48 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService11 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2025-08-01T21:19:48.833899591Z","hostname":"oxz_oximeter_4de84b54-bd9d-493d-8660-c983ef63ef33","pid":22610,"datalink":"oxControlService11"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2025-08-01T21:19:48.837511483Z","hostname":"oxz_oximeter_4de84b54-bd9d-493d-8660-c983ef63ef33","pid":22610,"datalink":"oxControlService11"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2025-08-01T21:19:48.852109759Z","hostname":"oxz_oximeter_4de84b54-bd9d-493d-8660-c983ef63ef33","pid":22610}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2025-08-01T21:19:48.860439579Z","hostname":"oxz_oximeter_4de84b54-bd9d-493d-8660-c983ef63ef33","pid":22610}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2025-08-01T21:19:48.867262002Z","hostname":"oxz_oximeter_4de84b54-bd9d-493d-8660-c983ef63ef33","pid":22610,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService11\""}
{"msg":"Ensuring there is a default route","v":0,"name":"zone-setup","level":30,"time":"2025-08-01T21:19:49.342896983Z","hostname":"oxz_oximeter_4de84b54-bd9d-493d-8660-c983ef63ef33","pid":22610,"gateway":"Ipv6(fd00:1122:3344:101::1)"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2025-08-01T21:19:49.351774083Z","hostname":"oxz_oximeter_4de84b54-bd9d-493d-8660-c983ef63ef33","pid":22610,"zonename":"\"oxz_oximeter_4de84b54-bd9d-493d-8660-c983ef63ef33\""}
[ Aug  1 21:19:49 Method "start" exited with status 0. ]