[ Aug 11 21:33:21 Enabled. ]
[ Aug 11 21:33:21 Rereading configuration. ]
[ Aug 11 21:33:23 Rereading configuration. ]
[ Aug 11 21:33:28 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService20 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2025-08-11T21:33:29.035677054Z","hostname":"oxz_oximeter_9bd620b0-c604-405e-a42f-fff73acaf31a","pid":22947,"datalink":"oxControlService20"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2025-08-11T21:33:29.039263684Z","hostname":"oxz_oximeter_9bd620b0-c604-405e-a42f-fff73acaf31a","pid":22947,"datalink":"oxControlService20"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2025-08-11T21:33:29.051358757Z","hostname":"oxz_oximeter_9bd620b0-c604-405e-a42f-fff73acaf31a","pid":22947}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2025-08-11T21:33:29.055974794Z","hostname":"oxz_oximeter_9bd620b0-c604-405e-a42f-fff73acaf31a","pid":22947}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2025-08-11T21:33:29.060712473Z","hostname":"oxz_oximeter_9bd620b0-c604-405e-a42f-fff73acaf31a","pid":22947,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService20\""}
{"msg":"Ensuring there is a default route","v":0,"name":"zone-setup","level":30,"time":"2025-08-11T21:33:29.518990813Z","hostname":"oxz_oximeter_9bd620b0-c604-405e-a42f-fff73acaf31a","pid":22947,"gateway":"Ipv6(fd00:1122:3344:101::1)"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2025-08-11T21:33:29.525146166Z","hostname":"oxz_oximeter_9bd620b0-c604-405e-a42f-fff73acaf31a","pid":22947,"zonename":"\"oxz_oximeter_9bd620b0-c604-405e-a42f-fff73acaf31a\""}
[ Aug 11 21:33:29 Method "start" exited with status 0. ]