[ Aug 28 21:33:06 Enabled. ]
[ Aug 28 21:33:06 Rereading configuration. ]
[ Aug 28 21:33:08 Rereading configuration. ]
[ Aug 28 21:33:15 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService23 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2025-08-28T21:33:15.847499958Z","hostname":"oxz_oximeter_fbcc3716-f2fd-4c7d-a691-c299da81c53f","pid":23319,"datalink":"oxControlService23"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2025-08-28T21:33:15.853020791Z","hostname":"oxz_oximeter_fbcc3716-f2fd-4c7d-a691-c299da81c53f","pid":23319,"datalink":"oxControlService23"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2025-08-28T21:33:15.859807837Z","hostname":"oxz_oximeter_fbcc3716-f2fd-4c7d-a691-c299da81c53f","pid":23319}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2025-08-28T21:33:15.863035511Z","hostname":"oxz_oximeter_fbcc3716-f2fd-4c7d-a691-c299da81c53f","pid":23319}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2025-08-28T21:33:15.866260224Z","hostname":"oxz_oximeter_fbcc3716-f2fd-4c7d-a691-c299da81c53f","pid":23319,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService23\""}
{"msg":"Ensuring there is a default route","v":0,"name":"zone-setup","level":30,"time":"2025-08-28T21:33:16.321018399Z","hostname":"oxz_oximeter_fbcc3716-f2fd-4c7d-a691-c299da81c53f","pid":23319,"gateway":"Ipv6(fd00:1122:3344:101::1)"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2025-08-28T21:33:16.327379504Z","hostname":"oxz_oximeter_fbcc3716-f2fd-4c7d-a691-c299da81c53f","pid":23319,"zonename":"\"oxz_oximeter_fbcc3716-f2fd-4c7d-a691-c299da81c53f\""}
[ Aug 28 21:33:16 Method "start" exited with status 0. ]