[ Aug 28 21:33:04 Enabled. ]
[ Aug 28 21:33:04 Rereading configuration. ]
[ Aug 28 21:33:06 Rereading configuration. ]
[ Aug 28 21:33:15 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService10 -s fd00:1122:3344:101::12 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2025-08-28T21:33:15.460643923Z","hostname":"oxz_crucible_2a282e28-2b34-4239-acf9-b923378ff5a6","pid":23119,"datalink":"oxControlService10"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2025-08-28T21:33:15.46321836Z","hostname":"oxz_crucible_2a282e28-2b34-4239-acf9-b923378ff5a6","pid":23119,"datalink":"oxControlService10"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2025-08-28T21:33:15.469944875Z","hostname":"oxz_crucible_2a282e28-2b34-4239-acf9-b923378ff5a6","pid":23119}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2025-08-28T21:33:15.473144308Z","hostname":"oxz_crucible_2a282e28-2b34-4239-acf9-b923378ff5a6","pid":23119}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2025-08-28T21:33:15.476405272Z","hostname":"oxz_crucible_2a282e28-2b34-4239-acf9-b923378ff5a6","pid":23119,"static address":"fd00:1122:3344:101::12","data link":"\"oxControlService10\""}
{"msg":"Ensuring there is a default route","v":0,"name":"zone-setup","level":30,"time":"2025-08-28T21:33:15.932426421Z","hostname":"oxz_crucible_2a282e28-2b34-4239-acf9-b923378ff5a6","pid":23119,"gateway":"Ipv6(fd00:1122:3344:101::1)"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2025-08-28T21:33:15.93857061Z","hostname":"oxz_crucible_2a282e28-2b34-4239-acf9-b923378ff5a6","pid":23119,"zonename":"\"oxz_crucible_2a282e28-2b34-4239-acf9-b923378ff5a6\""}
[ Aug 28 21:33:15 Method "start" exited with status 0. ]