[ Aug 28 21:51:14 Enabled. ]
[ Aug 28 21:51:14 Rereading configuration. ]
[ Aug 28 21:51:17 Rereading configuration. ]
[ Aug 28 21:51:22 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService23 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2025-08-28T21:51:22.34107596Z","hostname":"oxz_oximeter_fd98a40c-068a-4b93-ab1b-d99fbf20e031","pid":23445,"datalink":"oxControlService23"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2025-08-28T21:51:22.346016975Z","hostname":"oxz_oximeter_fd98a40c-068a-4b93-ab1b-d99fbf20e031","pid":23445,"datalink":"oxControlService23"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2025-08-28T21:51:22.353058843Z","hostname":"oxz_oximeter_fd98a40c-068a-4b93-ab1b-d99fbf20e031","pid":23445}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2025-08-28T21:51:22.359304121Z","hostname":"oxz_oximeter_fd98a40c-068a-4b93-ab1b-d99fbf20e031","pid":23445}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2025-08-28T21:51:22.362867201Z","hostname":"oxz_oximeter_fd98a40c-068a-4b93-ab1b-d99fbf20e031","pid":23445,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService23\""}
{"msg":"Ensuring there is a default route","v":0,"name":"zone-setup","level":30,"time":"2025-08-28T21:51:22.823106857Z","hostname":"oxz_oximeter_fd98a40c-068a-4b93-ab1b-d99fbf20e031","pid":23445,"gateway":"Ipv6(fd00:1122:3344:101::1)"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2025-08-28T21:51:22.829600009Z","hostname":"oxz_oximeter_fd98a40c-068a-4b93-ab1b-d99fbf20e031","pid":23445,"zonename":"\"oxz_oximeter_fd98a40c-068a-4b93-ab1b-d99fbf20e031\""}
[ Aug 28 21:51:22 Method "start" exited with status 0. ]