| 1 | | [ Sep 18 00:39:25 Enabled. ] |
| 2 | | [ Sep 18 00:39:25 Rereading configuration. ] |
| 3 | | [ Sep 18 00:39:26 Rereading configuration. ] |
| 4 | | [ Sep 18 00:39:30 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService18 -s fd00:1122:3344:101::19 -g fd00:1122:3344:101::1"). ] |
| 5 | | note: configured to log to "/dev/stderr" |
| 6 | 2025-09-18T00:39:30.891Z | INFO | zone-setup: Ensuring IP interface exists on datalink
datalink = oxControlService18
|
| 7 | 2025-09-18T00:39:30.896Z | INFO | zone-setup: Setting MTU to 9000 for IPv6 and IPv4
datalink = oxControlService18
|
| 8 | 2025-09-18T00:39:30.904Z | INFO | zone-setup: Setting TCP recv_buf size to 1 MB
|
| 9 | 2025-09-18T00:39:30.907Z | INFO | zone-setup: Setting TCP congestion control algorithm to cubic
|
| 10 | 2025-09-18T00:39:30.910Z | INFO | zone-setup: Ensuring static and auto-configured addresses are set on the IP interface
data link = "oxControlService18"
static address = fd00:1122:3344:101::19
|
| 11 | 2025-09-18T00:39:31.372Z | INFO | zone-setup: Ensuring there is a default route
gateway = Ipv6(fd00:1122:3344:101::1)
|
| 12 | 2025-09-18T00:39:31.378Z | INFO | zone-setup: Populating hosts file for zone
zonename = "oxz_crucible_8f9d84c2-dcd0-4bcd-90fd-b72e0b1ac2cb"
|
| 13 | | [ Sep 18 00:39:31 Method "start" exited with status 0. ] |