[ Sep 19 00:30:54 Enabled. ]
[ Sep 19 00:30:54 Rereading configuration. ]
[ Sep 19 00:30:55 Rereading configuration. ]
[ Sep 19 00:30:57 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService12 -s fd00:1122:3344:101::16 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2025-09-19T00:30:57.992536389Z","hostname":"oxz_crucible_18a78fca-2619-4d85-8686-365459f4ca34","pid":25210,"datalink":"oxControlService12"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2025-09-19T00:30:57.997595346Z","hostname":"oxz_crucible_18a78fca-2619-4d85-8686-365459f4ca34","pid":25210,"datalink":"oxControlService12"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2025-09-19T00:30:58.014403236Z","hostname":"oxz_crucible_18a78fca-2619-4d85-8686-365459f4ca34","pid":25210}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2025-09-19T00:30:58.020716038Z","hostname":"oxz_crucible_18a78fca-2619-4d85-8686-365459f4ca34","pid":25210}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2025-09-19T00:30:58.02621001Z","hostname":"oxz_crucible_18a78fca-2619-4d85-8686-365459f4ca34","pid":25210,"static address":"fd00:1122:3344:101::16","data link":"\"oxControlService12\""}
{"msg":"Ensuring there is a default route","v":0,"name":"zone-setup","level":30,"time":"2025-09-19T00:30:58.486406623Z","hostname":"oxz_crucible_18a78fca-2619-4d85-8686-365459f4ca34","pid":25210,"gateway":"Ipv6(fd00:1122:3344:101::1)"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2025-09-19T00:30:58.496616707Z","hostname":"oxz_crucible_18a78fca-2619-4d85-8686-365459f4ca34","pid":25210,"zonename":"\"oxz_crucible_18a78fca-2619-4d85-8686-365459f4ca34\""}
[ Sep 19 00:30:58 Method "start" exited with status 0. ]