[ Nov 13 07:58:42 Enabled. ]
[ Nov 13 07:58:42 Rereading configuration. ]
[ Nov 13 07:58:43 Rereading configuration. ]
[ Nov 13 07:58:46 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService16 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2025-11-13T07:58:46.959337338Z","hostname":"oxz_oximeter_87d2803d-0c3b-4aec-a08d-4edc5d8a6a5d","pid":23646,"datalink":"oxControlService16"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2025-11-13T07:58:46.965101333Z","hostname":"oxz_oximeter_87d2803d-0c3b-4aec-a08d-4edc5d8a6a5d","pid":23646,"datalink":"oxControlService16"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2025-11-13T07:58:46.971587078Z","hostname":"oxz_oximeter_87d2803d-0c3b-4aec-a08d-4edc5d8a6a5d","pid":23646}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2025-11-13T07:58:46.975387943Z","hostname":"oxz_oximeter_87d2803d-0c3b-4aec-a08d-4edc5d8a6a5d","pid":23646}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2025-11-13T07:58:46.978545525Z","hostname":"oxz_oximeter_87d2803d-0c3b-4aec-a08d-4edc5d8a6a5d","pid":23646,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService16\""}
{"msg":"Ensuring there is a default route","v":0,"name":"zone-setup","level":30,"time":"2025-11-13T07:58:47.436451479Z","hostname":"oxz_oximeter_87d2803d-0c3b-4aec-a08d-4edc5d8a6a5d","pid":23646,"gateway":"Ipv6(fd00:1122:3344:101::1)"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2025-11-13T07:58:47.442143164Z","hostname":"oxz_oximeter_87d2803d-0c3b-4aec-a08d-4edc5d8a6a5d","pid":23646,"zonename":"\"oxz_oximeter_87d2803d-0c3b-4aec-a08d-4edc5d8a6a5d\""}
[ Nov 13 07:58:47 Method "start" exited with status 0. ]