| 1 | | [ Nov 21 18:06:17 Enabled. ] |
| 2 | | [ Nov 21 18:06:17 Rereading configuration. ] |
| 3 | | [ Nov 21 18:06:18 Rereading configuration. ] |
| 4 | | [ Nov 21 18:06:19 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService4 -s fd00:1122:3344:101::1b -g fd00:1122:3344:101::1"). ] |
| 5 | | note: configured to log to "/dev/stderr" |
| 6 | 2025-11-21T18:06:19.164Z | INFO | zone-setup: Ensuring IP interface exists on datalink
datalink = oxControlService4
|
| 7 | 2025-11-21T18:06:19.169Z | INFO | zone-setup: Setting MTU to 9000 for IPv6 and IPv4
datalink = oxControlService4
|
| 8 | 2025-11-21T18:06:19.175Z | INFO | zone-setup: Setting TCP recv_buf size to 1 MB
|
| 9 | 2025-11-21T18:06:19.177Z | INFO | zone-setup: Setting TCP congestion control algorithm to cubic
|
| 10 | 2025-11-21T18:06:19.180Z | INFO | zone-setup: Ensuring static and auto-configured addresses are set on the IP interface
data link = "oxControlService4"
static address = fd00:1122:3344:101::1b
|
| 11 | 2025-11-21T18:06:19.634Z | INFO | zone-setup: Ensuring there is a default route
gateway = Ipv6(fd00:1122:3344:101::1)
|
| 12 | 2025-11-21T18:06:19.639Z | INFO | zone-setup: Populating hosts file for zone
zonename = "oxz_ntp_7d9a071c-964f-4fe4-a8ff-6a3d4efe77c8"
|
| 13 | | [ Nov 21 18:06:19 Method "start" exited with status 0. ] |