[ Dec 24 01:16:17 Enabled. ]
[ Dec 24 01:16:17 Rereading configuration. ]
[ Dec 24 01:16:18 Rereading configuration. ]
[ Dec 24 01:16:21 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService12 -s fd00:1122:3344:101::13 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2025-12-24T01:16:21.426223836Z","hostname":"oxz_crucible_4be15992-cf66-4c6f-a841-a4c6b00ff18f","pid":24779,"datalink":"oxControlService12"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2025-12-24T01:16:21.436894727Z","hostname":"oxz_crucible_4be15992-cf66-4c6f-a841-a4c6b00ff18f","pid":24779,"datalink":"oxControlService12"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2025-12-24T01:16:21.44543601Z","hostname":"oxz_crucible_4be15992-cf66-4c6f-a841-a4c6b00ff18f","pid":24779}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2025-12-24T01:16:21.45186454Z","hostname":"oxz_crucible_4be15992-cf66-4c6f-a841-a4c6b00ff18f","pid":24779}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2025-12-24T01:16:21.456947324Z","hostname":"oxz_crucible_4be15992-cf66-4c6f-a841-a4c6b00ff18f","pid":24779,"static address":"fd00:1122:3344:101::13","data link":"\"oxControlService12\""}
{"msg":"Ensuring there is a default route","v":0,"name":"zone-setup","level":30,"time":"2025-12-24T01:16:21.915255753Z","hostname":"oxz_crucible_4be15992-cf66-4c6f-a841-a4c6b00ff18f","pid":24779,"gateway":"Ipv6(fd00:1122:3344:101::1)"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2025-12-24T01:16:21.922236785Z","hostname":"oxz_crucible_4be15992-cf66-4c6f-a841-a4c6b00ff18f","pid":24779,"zonename":"\"oxz_crucible_4be15992-cf66-4c6f-a841-a4c6b00ff18f\""}
[ Dec 24 01:16:21 Method "start" exited with status 0. ]