[ Dec 30 16:43:53 Enabled. ]
[ Dec 30 16:43:53 Rereading configuration. ]
[ Dec 30 16:43:55 Rereading configuration. ]
[ Dec 30 16:43:58 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService22 -s fd00:1122:3344:101::19 -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2025-12-30T16:43:58.746344436Z","hostname":"oxz_crucible_ea42afbf-34bd-4df5-ab27-bc797e7530d5","pid":23185,"datalink":"oxControlService22"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2025-12-30T16:43:58.755451067Z","hostname":"oxz_crucible_ea42afbf-34bd-4df5-ab27-bc797e7530d5","pid":23185,"datalink":"oxControlService22"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2025-12-30T16:43:58.7681893Z","hostname":"oxz_crucible_ea42afbf-34bd-4df5-ab27-bc797e7530d5","pid":23185}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2025-12-30T16:43:58.773939846Z","hostname":"oxz_crucible_ea42afbf-34bd-4df5-ab27-bc797e7530d5","pid":23185}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2025-12-30T16:43:58.779486446Z","hostname":"oxz_crucible_ea42afbf-34bd-4df5-ab27-bc797e7530d5","pid":23185,"static address":"fd00:1122:3344:101::19","data link":"\"oxControlService22\""}
{"msg":"Ensuring there is a default route","v":0,"name":"zone-setup","level":30,"time":"2025-12-30T16:43:59.260497617Z","hostname":"oxz_crucible_ea42afbf-34bd-4df5-ab27-bc797e7530d5","pid":23185,"gateway":"Ipv6(fd00:1122:3344:101::1)"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2025-12-30T16:43:59.269183077Z","hostname":"oxz_crucible_ea42afbf-34bd-4df5-ab27-bc797e7530d5","pid":23185,"zonename":"\"oxz_crucible_ea42afbf-34bd-4df5-ab27-bc797e7530d5\""}
[ Dec 30 16:43:59 Method "start" exited with status 0. ]