[ Jan 16 03:31:46 Enabled. ]
[ Jan 16 03:31:46 Rereading configuration. ]
[ Jan 16 03:31:47 Rereading configuration. ]
[ Jan 16 03:31:52 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService22 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-01-16T03:31:52.25609782Z","hostname":"oxz_oximeter_cb23dca2-ee8a-48c7-bd7d-96233378fa94","pid":25535,"datalink":"oxControlService22"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-01-16T03:31:52.26081187Z","hostname":"oxz_oximeter_cb23dca2-ee8a-48c7-bd7d-96233378fa94","pid":25535,"datalink":"oxControlService22"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-01-16T03:31:52.267283017Z","hostname":"oxz_oximeter_cb23dca2-ee8a-48c7-bd7d-96233378fa94","pid":25535}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-01-16T03:31:52.270079079Z","hostname":"oxz_oximeter_cb23dca2-ee8a-48c7-bd7d-96233378fa94","pid":25535}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-01-16T03:31:52.273361768Z","hostname":"oxz_oximeter_cb23dca2-ee8a-48c7-bd7d-96233378fa94","pid":25535,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService22\""}
{"msg":"Ensuring there is a default route","v":0,"name":"zone-setup","level":30,"time":"2026-01-16T03:31:52.729135366Z","hostname":"oxz_oximeter_cb23dca2-ee8a-48c7-bd7d-96233378fa94","pid":25535,"gateway":"Ipv6(fd00:1122:3344:101::1)"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-01-16T03:31:52.735062714Z","hostname":"oxz_oximeter_cb23dca2-ee8a-48c7-bd7d-96233378fa94","pid":25535,"zonename":"\"oxz_oximeter_cb23dca2-ee8a-48c7-bd7d-96233378fa94\""}
[ Jan 16 03:31:52 Method "start" exited with status 0. ]