[ Jan 16 20:29:56 Enabled. ]
[ Jan 16 20:29:56 Rereading configuration. ]
[ Jan 16 20:29:59 Rereading configuration. ]
[ Jan 16 20:30:10 Executing start method ("/opt/oxide/zone-setup-cli/bin/zone-setup common-networking -d oxControlService20 -s fd00:1122:3344:101::d -g fd00:1122:3344:101::1"). ]
note: configured to log to "/dev/stderr"
{"msg":"Ensuring IP interface exists on datalink","v":0,"name":"zone-setup","level":30,"time":"2026-01-16T20:30:10.480970077Z","hostname":"oxz_oximeter_4b4108da-92f0-4266-8006-169d4d0c3a91","pid":29017,"datalink":"oxControlService20"}
{"msg":"Setting MTU to 9000 for IPv6 and IPv4","v":0,"name":"zone-setup","level":30,"time":"2026-01-16T20:30:10.482261196Z","hostname":"oxz_oximeter_4b4108da-92f0-4266-8006-169d4d0c3a91","pid":29017,"datalink":"oxControlService20"}
{"msg":"Setting TCP recv_buf size to 1 MB","v":0,"name":"zone-setup","level":30,"time":"2026-01-16T20:30:10.489188101Z","hostname":"oxz_oximeter_4b4108da-92f0-4266-8006-169d4d0c3a91","pid":29017}
{"msg":"Setting TCP congestion control algorithm to cubic","v":0,"name":"zone-setup","level":30,"time":"2026-01-16T20:30:10.491732918Z","hostname":"oxz_oximeter_4b4108da-92f0-4266-8006-169d4d0c3a91","pid":29017}
{"msg":"Ensuring static and auto-configured addresses are set on the IP interface","v":0,"name":"zone-setup","level":30,"time":"2026-01-16T20:30:10.494979911Z","hostname":"oxz_oximeter_4b4108da-92f0-4266-8006-169d4d0c3a91","pid":29017,"static address":"fd00:1122:3344:101::d","data link":"\"oxControlService20\""}
{"msg":"Ensuring there is a default route","v":0,"name":"zone-setup","level":30,"time":"2026-01-16T20:30:10.956220726Z","hostname":"oxz_oximeter_4b4108da-92f0-4266-8006-169d4d0c3a91","pid":29017,"gateway":"Ipv6(fd00:1122:3344:101::1)"}
{"msg":"Populating hosts file for zone","v":0,"name":"zone-setup","level":30,"time":"2026-01-16T20:30:10.966073056Z","hostname":"oxz_oximeter_4b4108da-92f0-4266-8006-169d4d0c3a91","pid":29017,"zonename":"\"oxz_oximeter_4b4108da-92f0-4266-8006-169d4d0c3a91\""}
[ Jan 16 20:30:10 Method "start" exited with status 0. ]